Abstract:
The present work is focused on the fabrication of Sr-Ba based X-type ferrites substituted with
transition metals (TM: Ni, Co), and trivalent rare-earth cations (Nd, Dy, Pr, Gd) for
microwave applications. This dissertation presents a systematic study on four series namely,
SrBaCu2-xNixNdyFe28-yO46, SrBaMg2-xNixCoyFe28-yO46, SrBaZn2-xNixPryFe28-yO46 and
SrBaMn2-xCoxGdyFe28-yO46 (x=0 to 1.0 and y=0 to 0.1) of hexagonal ferrites. These X-type
materials were fabricated by sol-gel method at 1250 °C temperature. The thermal
decomposition of nitrate-citrate gel of as-synthesized samples and estimation of sintering
temperature to obtain X-type phase was determined by DSC, TGA, and DTA analysis. X-Ray
Diffraction patterns revealed pure X-type hexagonal phase of the investigated X-type
hexaferrites, except for the series doped with Dy-Co an extra peak of orthorhombic
phasedetected as DyFeO3 appeared for higher concentrations of Dy content. Lattice
parameters (lattice constants, porosity, X-ray density, bulk density, crystalline size) showed
variations with dopants (RE-TM) and their concentrations. There was increase in lattice
constants (a, c) with increase in dopants concentration which was attributed to introduction of
higher ionic radius of RE3+ cations in octahedral sites of Fe3+ ions.FTIR spectral study
revealed the presence of absorption bands in the range 400-600 cm-1which are characteristics
of hexaferrites. It was observed that substitution of RE-TM ions caused shifting of band
positions due to change in metal-oxygen bond length at A- and B-sites. From hysteresis loops
magnitudes of saturation magnetization, coercivity as well as retentivity were calculated. It
was observed that magnetic parameters (saturation magnetization, retentivity, coercivity)
were enhanced with RE-TM doping in these X-type ferrites. For all samples, the values of
saturation magnetization varied in range from 40 to 65 emu/g, and coercivity was found in
range 1500-3500 Oe, the high values of Ms and Hcsuggested application of these RE-TM
doped X-type ferrites in high density video recording and permanent magnets. The dielectric
characteristics were carried out in frequency range 1 MHz to 3 GHz. The real and imaginary
parts of dielectric constant and tangent loss were decreased with the increase of frequency on
the basis of Wagner and Koop's theory. The resonance peak appeared in all samples above 2
GHz (i.e. in MW band) which is characteristics of materials used for EMI attenuation. The
doping of RE-TM resulted in increase of dielectric constant, AC conductivity and Q-value for
all series. In the Present studies it had been found that Q-factor decreased with concentration
of RE-TM ions which reflected the fact that with addition of RE-TM substitution the loss of
energy has been enhanced. Reduced size, high porosity, high losses, low Q values and high
saturation magnetization endorsed these X-type materials for microwave absorption
applications such as in mobiles, medicine, satellite communication, stealth and RAM etc.