PASTIC Dspace Repository

Browsing Journal of the Pakistan Materials Society (JPMS) by Issue Date

Browsing Journal of the Pakistan Materials Society (JPMS) by Issue Date

Sort by: Order: Results:

  • Aurangzeb Khan (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-01)
    A variety of Zinc Oxide (ZnO) nanostructures such as nanowires, nanospheres, nanorods, flower-like, tubules and tetrapods were synthesized via thermal evaporation process using Zn and ZnO precursors in a tube furnace. The ...
  • S. Ali; F. Gonella; P. Mazzoldi (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-02)
    Field-Assisted Solid-State Ion-Exchange (FASSIE) technique for doping silicate glasses with transition metals and rare-earths has been attracting much attention for its potential applications in light waveguides, luminescent ...
  • Falak Niaz; Khan, Muhammad Riaz; Ihsan-ul-Haque (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-04)
    Results regarding the microstructural and thermal analysis of etched low carbon steel samples collected from the local steel industry are presented. The effect of varying etching time or concentration of the etchant was ...
  • Muhammad Daniel Pirzada; Mian M. Nawaz (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-03)
    Materials in powder form find vast applications that range from structural applications to food items. Many situations demand different or even contradicting set of bulk characteristics and surface characteristics of ...
  • A. Maqsood; K Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-04)
    The correlation of physical and chemical properties with structural characteristic is important in Materials Science. There are two methods destructive method first and non-destructive second. The destructive method requires ...
  • S. Z. Hussain; S. K. Durrani; S. K. Durrani; M A. Hussain; N. Hussain; M. Ahmad (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-06)
    Magnesium aluminum silicate (MAS) glass ceramic systems are of technological importance due to their application for high voltage and in ultra high vacuum. These materials not only possess peculiar feature of machinability ...
  • H. U. Khan; I. M. Reaney; I. Sterianou (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-07-01)
    LixAg1-xNbO3 (0 ≤ x ≤ 0.10) compositions have been fabricated by the mixed oxide route to study the effect of Li on the host material, AgNbO3. The main X-ray diffraction (XRD) traces for ceramics with x < 0.10 were single ...
  • Afzal Khan; Carmen Jimenez; Deschanvres, Jean-luc (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-07-02)
    The annealing process for obtaining SrCu2O2 out of the as-deposited Sr-Cu-O films by MOCVD was studied. Whatever the deposition condition may be, the as-deposited films are always composed of SrCO3 and CuO. As-deposited ...
  • Salma Gul; Anwar-ul-Haq Ali Shah; Salma Bilal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-07-03)
    Soluble polyaniline (PANI-DBSA) was synthesized by inverse emulsion polymerization. Dedecylbenzene sulfonic acid (DBSA) was selected as a surfactant because it also acts as a dopant. In this process a mixture of chloroform ...
  • Humaira Anwar; Asghari Maqsood (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-08-03)
    Mn-Zn ferrite powders (Mn0.5Zn0.5Fe2O4) were prepared by the chemical co-precipitation method. The effect of annealing temperature on the crystalline phase formation and dielectric properties were investigated by X-ray ...
  • N. H. Hamodi; K. A. Papadopoulou; Y. Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-09-04)
    The underground disposal of waste arising from the nuclear industry needs constant evaluation in order to improve it through minimizing the volume and cost by reducing the amount of glass used without compromising the ...
  • Khan, Khalid (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-01)
    Pakistan has not been able to utilize its precious mineral wealth for its economic growth and development, despite having comparatively strong mineral base. The development of material industry is critical and can play a ...
  • Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-01)
  • Humaira Seema; S. K. Durrani; K. Saeed; I. Mohammadzai; N. Hussain (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-02)
    Multiferroic BiFeO3 materials were synthesized by gel-combustion method using citric acid as a fuel. The as-synthesized materials were calcined at 600oC for 4 h to obtain single-phase material. The crystal structure and ...
  • Khan, Aurangzeb (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-02)
  • Yaseen Iqba (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-03)
  • K. H. Shah; S. Mustafa; A. Naeem; M. Waseem; T. Ahmad (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-06)
    Cr(III) sorption on the strong acid exchanger Amberlyst-15(H+ ) is studied as a function of time and temperature using basic chromium sulphate [Cr4(SO4)5(OH)2] solution. Increase in temperature has a positive effect on ...
  • Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-01)
  • Khan, Aqib Ali; Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-01)
    Chromite ores are basically classified on basis of Cr2O3 content and Cr to Fe ratio in a sample.The higher content of Cr increases the value of the ore but this is greatly affected by the presence of impurities in form ...
  • Mohammad Sohail; Salma Bilala; Anwar-ul-Haq Ali Shah (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-02)
    Polypyrole (PPy) is one of the most promising candidates for possible technological applications. However, its insolubility in common organic solvents limits its range of applications. In the present study an attempt has ...

Search DSpace


Advanced Search

Browse

My Account