PASTIC Dspace Repository

Browsing Journal of the Pakistan Materials Society (JPMS) by Title

Browsing Journal of the Pakistan Materials Society (JPMS) by Title

Sort by: Order: Results:

  • ABSTRACTS MATERIALS 2011 
    Yaseen Iqbal; Abdul Manan (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-06)
  • ANNEALING EFFECTS ON SURFACE MORPHOLOGY, THICKNESS AND CHEMICAL PHASES OF Sr-Cu-O THIN FILM DEPOSITED BY MOCVD 
    Afzal Khan; Carmen Jimenez; Deschanvres, Jean-luc (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-07-02)
    The annealing process for obtaining SrCu2O2 out of the as-deposited Sr-Cu-O films by MOCVD was studied. Whatever the deposition condition may be, the as-deposited films are always composed of SrCO3 and CuO. As-deposited ...
  • AUTO-COMBUSTION SYNTHESIS AND CHARACTERIZATION OF MULTI-FERROIC (BiFeO3) MATERIALS 
    Humaira Seema; S. K. Durrani; K. Saeed; I. Mohammadzai; N. Hussain (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-02)
    Multiferroic BiFeO3 materials were synthesized by gel-combustion method using citric acid as a fuel. The as-synthesized materials were calcined at 600oC for 4 h to obtain single-phase material. The crystal structure and ...
  • CHARACTERISTICS OF DOLOMITE FROM SWABI, KHYBER PAKHTUNKHWA FOR ITS USE AS A RAW MATERIAL IN FERTILIZER PRODUCTION 
    Muhammad Fahad; Yaseen Iqbal; Rick Ubic (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-04)
    The potential of dolomite CaMg(CO3)2 from the Swabi district of Khyber Pakhtunkhwa as a raw material in fertilizer production was investigated in this paper. Dolomite was found as a major mineral phase when investigated ...
  • GUEST EDITORIAL NANOTECHNOLOGY: HOPES AND EXPECTATIONS 
    Khan, Aurangzeb (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-02)
  • JPMS Conference Issue, Materials 2010 
    Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-01)
  • KINETIC INVESTIGATION OF CHROMIUM (III) REMOVAL BY STRONG ACID EXCHANGER AMBERLYST-15(H+ ) 
    K. H. Shah; S. Mustafa; A. Naeem; M. Waseem; T. Ahmad (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-06)
    Cr(III) sorption on the strong acid exchanger Amberlyst-15(H+ ) is studied as a function of time and temperature using basic chromium sulphate [Cr4(SO4)5(OH)2] solution. Increase in temperature has a positive effect on ...
  • MATERIALS 2010: A REPORT 
    Yaseen Iqba (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-03)
  • MATERIALS 2011: A REPORT 
    Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-01)
  • Materials Characterization by Non-Destructive Methods 
    A. Maqsood; K Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-04)
    The correlation of physical and chemical properties with structural characteristic is important in Materials Science. There are two methods destructive method first and non-destructive second. The destructive method requires ...
  • MATERIALS INDUSTRY: ECONOMIC AND ENVIRONMENTAL ISSUES: AN OVERVIEW 
    Khan, Khalid (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-01)
    Pakistan has not been able to utilize its precious mineral wealth for its economic growth and development, despite having comparatively strong mineral base. The development of material industry is critical and can play a ...
  • MICROSTRUCTURAL CHARACTERIZATION OF LOW CARBON STEEL USED IN AIRCRAFT INDUSTRY 
    Falak Niaz; Khan, Muhammad Riaz; Ihsan-ul-Haque (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-04)
    Results regarding the microstructural and thermal analysis of etched low carbon steel samples collected from the local steel industry are presented. The effect of varying etching time or concentration of the etchant was ...
  • A NEW SUPERSTRUCTURE IN (LiXAg1-X) NbO3 (0.05 < X < 0.10) 
    H. U. Khan; I. M. Reaney; I. Sterianou (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-07-01)
    LixAg1-xNbO3 (0 ≤ x ≤ 0.10) compositions have been fabricated by the mixed oxide route to study the effect of Li on the host material, AgNbO3. The main X-ray diffraction (XRD) traces for ceramics with x < 0.10 were single ...
  • AN OVERVIEW OF OSMOTIC POWER GENERATION AND ITS SCOPE IN PAKISTAN 
    Syed Waqar Hasan; Syed Faraz Hasan (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-03)
    The need of introducing innovative power generation methods is increasing rapidly worldwide. The conventional fuel driven methods not only require heavy financial investments, they have also been held responsible for many ...
  • PHASE AND MICROSTRUCTURAL CHARACTERIZATION OF HAZARA BARITE, PAKISTAN 
    Sajjad Ali; Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-05)
    Barite is an industrially precipitated mineral and is used in the drilling oil and gas wells. In the present study, barite samples collected from Hazara division of Khyber Pukhtunkhwa (KPK), Pakistan were investigated using ...
  • PHASE AND MICROSTRUCTURE OF CHROMITE: A DIFFERENT APPROACH 
    Khan, Aqib Ali; Yaseen Iqbal (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-01)
    Chromite ores are basically classified on basis of Cr2O3 content and Cr to Fe ratio in a sample.The higher content of Cr increases the value of the ore but this is greatly affected by the presence of impurities in form ...
  • Phase and Thermal Analysis of Magnesium Aluminum Silicate Glass Ceramic 
    S. Z. Hussain; S. K. Durrani; S. K. Durrani; M A. Hussain; N. Hussain; M. Ahmad (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-06)
    Magnesium aluminum silicate (MAS) glass ceramic systems are of technological importance due to their application for high voltage and in ultra high vacuum. These materials not only possess peculiar feature of machinability ...
  • Raman Spectroscopic Study of the ZnO Nanostructures 
    Aurangzeb Khan (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-01)
    A variety of Zinc Oxide (ZnO) nanostructures such as nanowires, nanospheres, nanorods, flower-like, tubules and tetrapods were synthesized via thermal evaporation process using Zn and ZnO precursors in a tube furnace. The ...
  • Surface Modification of Powders 
    Muhammad Daniel Pirzada; Mian M. Nawaz (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-06-03)
    Materials in powder form find vast applications that range from structural applications to food items. Many situations demand different or even contradicting set of bulk characteristics and surface characteristics of ...
  • SYNTHESIS AND CHARACTERIZATION OF COMPLETELY SOLUBLE POLYPYROLE SALTS VIA INVERSE EMULSION POLYMERIZATION USING A MIXTURE OF CHLOROFORM AND 2- BUTANOL AS A DISPERSING MEDIUM 
    Mohammad Sohail; Salma Bilala; Anwar-ul-Haq Ali Shah (Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-02)
    Polypyrole (PPy) is one of the most promising candidates for possible technological applications. However, its insolubility in common organic solvents limits its range of applications. In the present study an attempt has ...

Search DSpace


Advanced Search

Browse

My Account