Sajjad Ali; Yaseen Iqbal(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-05)
Barite is an industrially precipitated mineral and is used in the drilling oil and gas wells. In the present study, barite samples collected from Hazara division of Khyber Pukhtunkhwa (KPK), Pakistan were investigated using ...
Muhammad Fahad; Yaseen Iqbal; Rick Ubic(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-04)
The potential of dolomite CaMg(CO3)2 from the Swabi district of Khyber Pakhtunkhwa as a raw material in fertilizer production was investigated in this paper. Dolomite was found as a major mineral phase when investigated ...
Syed Waqar Hasan; Syed Faraz Hasan(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-03)
The need of introducing innovative power generation methods is increasing rapidly worldwide. The conventional fuel driven methods not only require heavy financial investments, they have also been held responsible for many ...
Mohammad Sohail; Salma Bilala; Anwar-ul-Haq Ali Shah(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-02)
Polypyrole (PPy) is one of the most promising candidates for possible technological applications. However, its insolubility in common organic solvents limits its range of applications. In the present study an attempt has ...
Khan, Aqib Ali; Yaseen Iqbal(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2011-12-01)
Chromite ores are basically classified on basis of Cr2O3 content and Cr to Fe ratio in a sample.The
higher content of Cr increases the value of the ore but this is greatly affected by the presence of impurities in form ...
Falak Niaz; Khan, Muhammad Riaz; Ihsan-ul-Haque(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-01-04)
Results regarding the microstructural and thermal analysis of etched low carbon steel samples collected from the local steel industry are presented. The effect of varying etching time or concentration of the etchant was ...
Humaira Seema; S. K. Durrani; K. Saeed; I. Mohammadzai; N. Hussain(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-02)
Multiferroic BiFeO3 materials were synthesized by gel-combustion method using citric acid as a fuel. The as-synthesized materials were calcined at 600oC for 4 h to obtain single-phase material. The crystal structure and ...
Khan, Khalid(Peshawar: Materials Research Laboratory Department of Physics University of Peshawar, Pakistan, 2010-12-01)
Pakistan has not been able to utilize its precious mineral wealth for its economic growth and development, despite having comparatively strong mineral base. The development of material industry is critical and can play a ...