PASTIC Dspace Repository

Design of Fourth Order Active Band-Pass Filter With Sallen and Key Topology

Show simple item record

dc.contributor.author Y. A. Durrani
dc.date.accessioned 2023-03-14T03:33:07Z
dc.date.available 2023-03-14T03:33:07Z
dc.date.issued 2016-08-07
dc.identifier.citation Durrani, Y. A. (2016). Design of Fourth Order Active Band-Pass Filter With Sallen and Key Topology. University of Engineering and Technology Taxila. Technical Journal, 21(3), 51. en_US
dc.identifier.issn 2313-7770
dc.identifier.uri http://142.54.178.187:9060/xmlui/handle/123456789/18803
dc.description.abstract Analog active filters can be found in most of the electronic circuits. One major application of active filters involve an important class of sharp cutoff filter used to condition analog input signals that are being sampled and converted to digital signal as real-time to the modem computers. In this paper, we present the design of active filter with the second and the fourth order Butterworth responses in the category of Sallen and Key filter architecture. This type of filter has voltage controlled voltage source topology that uses a unity-gain amplifier. The complex transfer function of the filter is obtained and the capacitor/ resistor values are calculated. The filter is simulated with the Multisim program and compared with the Matlab tool. The results of the frequency responses are very similar to each other. en_US
dc.language.iso en en_US
dc.publisher Taxila: University of Engineering and Technology, Taxila en_US
dc.subject Active Filters en_US
dc.subject Sallen and Key Topology en_US
dc.subject Butterworth Response en_US
dc.subject Frequency Response en_US
dc.subject Power Estimation en_US
dc.title Design of Fourth Order Active Band-Pass Filter With Sallen and Key Topology en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account