Sea water samples collected at different depths from 10 stations along the Clifton beach of Karachi Coast were analyzed for dissolved/dispersed polyaromatic and aliphatic hydrocarbons (PAHs and AHs) by GC and GC-MS. Sampling ...

In this study Methylmethacrylate and Ethylenediammine have been used as additive in high strength Portland cement and its impact on the cementing properties (water of consistency, setting time and hydration behavior i.e., ...

This research article deals with the studies on the development of the correlation of COD, BOD, and BOD5 of domestic wastewater (DWW), and fermented domestic wastewater (FDWW) with the power output of the microbial fuel ...

To study the effect of season and soil concentration on the uptake of minerals in Spinacia oleracea, it was grown on minerals chromium (Cr), zinc (Zn), manganese (Mn), copper (Cu), magnesium (Mg) and iron (Fe) supplemented ...

Risk assessment study of trihalomethanes (THMs) through different exposure pathways is based on the results of THMs concentration in tap water samples collected from various locations of Karachi city. The lifetime cancer ...

Heavy metal ions have the severe hazardous effects on human health even were present in traces in waste water. Conventional methods are not economical for the removal of low level concentration of these ions. The present ...

Paenibacillus polymyxa strains produce fusaricidin type compounds that are active against a wide variety of Gram-positive bacteria and fungi. Growth and production of fusaricidin type antifungal compounds by P. polymyxa ...

It was hypothesized that the use of sulfur powder or sulfur electrode in the sea-water electrolysis would prevent (i) chlorine evolution, (ii) precipitation of Mg(OH)₂ and would at the same time result in the production ...

Adsorption is potentially an attractive methodology for removing hazardous dyestuff and heavy metals from industrial effluents. In this work the removing efficiency of an industrially important dye Alizarin Red S from ...

Different on site treatment technologies are in practice for industrial wastewaters but bioremediation using white rot fungi is the most attractive option due to complete degradation of the pollutants to non toxic end ...