Abstract:
MnxZn1−xFe2O4 (0.0≤x≤ 1.0) ferrite nano particles were synthesized for concentration varying from 0.27 to 0.87 to obtain chemically homogenous powder for obtaining fine particle size by co precipitation technique. Keeping in view the interest of scientists for particle size, the present work focus on the impact of UV radiation to control the particle size of prepared fine magnetic particles. The particles were digested for ninety minutes at a temperature of 90oC. The samples were divided into four equal quantities and were subjected to different doses of UV radiation. The chemically produced samples of Mn–Zn ferrite nano particles were analyzed by XRD which confirmed cubic spinel structure of the material. The average crystallite size (t), lattice parameter (α) and other structural parameters of UV-irradiated MnxZn1−xFe2O4 spinel ferrite were calculated from XRD data. The spinel peak of the irradiated sample when compared with the control sample, shifted from 35.38 to 35.15. In few samples, additional peaks supporting the ferrite structure were also observed. The variation in the particle sizes observed for various doses of UV irradiation were in the range of 17.6 to 6.2 nm, whereas the particle size of the control was 8.82nm. The experiment was repeated for different concentrations, at the same digestion temperature and time revealed the similar results indicating that UV radiations can have a remarkable effect to control the phase and size of nano size fine magnetic ferrite particles. The present work successfully document the impact of UV to control the particle size.
