Engineering and Technology: Recent submissions

Now showing items 201-220 of 928

Chattering Mitigation in Monopulse Radar Using HOSM

Zafar, Usman (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

Tracking radar uses pencil beam to track the true range and bearing of target. They are used in several applications like to supervise the specific air routes, military applications, radio astronomy etc. Monopulse tracking ...
Application of STATCOM for the Mitigation of Disturbance and Stability of Wind Farm Connected to Weak Grid

Shah, Syed Wahid (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

This thesis describes the impact of Static Synchronous Compensator (STATCOM) on stability of the wind farms based on double fed induction generators (DFIG) and fixed speed induction generators (FSIG) which are connected ...
Comparative Analysis of Conventional VSC and MMC on the Basis of Output Power Quality and Control Performance

Irshad, Tanzeela (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

The conventional two-level voltage source converter (VSC) was first commercialized by ABB in 1997 in an HVDC project. Being cost effective, compact, having simpler design structure and stiff control, it attracted the ...
Real-time Fault Detection System For Large Scale Grid-Integrated Solar Photovoltaic Power Plants

Iqbal, Muhammad Saad (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

The global solar photovoltaic (PV) installations are increasing rapidly in an effort to slow down the process of global warming and climate change. The clean and green energy from solar PV power plants is being utilized ...
State and Parameter Estimation of Induction Motor through Adaptive High Gain Observer

Ullah, Mohsin (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

Induction motor is the most widely used electric motor in industry, EVs and HEVs due to high reliability, ruggedness, low cost of maintenance, high torque during starting and wide range of operating speed. However, highly ...
Feasibility of Natural Fiber Reinforced Stabilized-Earth-Brick in Masonry to Promote Sustainability

Zahid, Muhammad (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

Conventional bricks are being used in masonry structures to carry building load and provide partitions. The manufacturing process of such bricks is degrading natural environment and making negative impact, which is a ...
Low Communication-Parallel Distributed Adaptive Signal Processing (LC-PDASP) Architecture for Processing-Inefficient Low Cost Platforms

Hussain, Ghalib (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

In order to reduce the extensive processing of the centralized processor, distributed adaptive techniques are used that provide a cooperative solution for high definition adaptive algorithms. The distributed adaptive ...
Dynamic Behavior of Prototype Interlocking Plastic-block Structure Using Locally Developed Low-cost Shake Table

Khan, Fayaz (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

In area, most of the non-engineered structures are collapsed in earthquake due to strong ground motion of earth. In seismic active region there is significant loss of life due to lack of earthquake resistant-housing. In ...
Segmentation and Classification in Remotely Sensed Imagery

Khurshid, Hasnat (Electrical Engineering Department, Military College of Signals, National University of Sciences and Technology, Islamabad, Pakistan, 2016-02-01)

Remote sensing technology and it’s applications are rapidly advancing. The algorithms and techniques for processing of remotely sensed images has thus become increasingly important and is an area of active research. ...
Study and Simulations of Klystron Modulator Pulse Transformer

Toor, Waqas Ahmed (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2019-01-01)

Pulse transformer transients are among the most common problems faced, during pulse modulator design. In order to deal with these problems, Pulse transformer’s parasitic elements must be minimized during pulse transformer ...
Behavior of Jute Fiber Reinforced Concrete having Glass Fiber Reinforced Polymer Rebars for Possible Application in Bridge Pier

Shah Muhammad Hassan, Sabri (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

Glass Fiber Reinforced Polymer Rebars (GFRP) has an emerging alternative solution of steel reinforcement for concrete structures due to its upgraded properties like high tensile strength, lightweight, and corrosions ...
Effect of Freeze-Thaw Cycles on Mechanical Properties of Jute Fiber Reinforced Concrete for Pavement

Muhammad, Affan (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

Concrete is usually used as a construction material in many infrastructures; because of its performance and behaviour. Freeze-thaw is one of the major hazards for pavements; which they have to experience due to fluctuation ...
Impact of High Penetration of PV Systems on Fault Current Levels in Conventional Distribution System

Ahmed, Yasir (Department of Electrical Engineering, Capital University of Science and Technology, Islamabad, 2018-01-01)

World is facing a major problem of energy crises and pollution. Renewable energy resources are practical solution and alternative to fossil fuel to make the future pollution free. Photovoltaic (PV) as distributed generation ...
Seismic Behavior of Multi Storied RCC Structures Using Different Sets of Stiffness Modification Factors

Afzal, Sadia (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2018-01-01)

Stiffness Modification Factors (SMFs) are utilized as a part of linear analysis of reinforced concrete structures to represent the impact of concrete cracking. Different sets of SMFs are recommended in different codes. ...
Seismic Behavior of Multi Storied RCC Structures Using Different Sets of Stiffness Modification Factors

Afzal, Sadia (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2018-01-01)

Stiffness Modification Factors (SMFs) are utilized as a part of linear analysis of reinforced concrete structures to represent the impact of concrete cracking. Different sets of SMFs are recommended in different codes. ...
Impact of Big Data Analytics Competency on Firm Performance with Mediating Role of Decision Making Performance and Innovation Capability

Ejaz, Misbah (Department of Mechanical Engineering, Capital University of Science and Technology, Islamabad, 2018-01-01)

Big data analytics is emerging as a game changing capability which generates valuable insights and reveals new patterns to keep organizations up-to-date and plan their moves accordingly. This research study aims at ...
Comparative Evaluation of Hydropower Potential of Jhelum and Indus Basins using GIS

Ali, Muhammad (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2018-01-01)

The increasing energy demand, due to the rapidly increasing population, and the resulting strain on our conventional energy sources, has proven the benefits of renewable energy sources as a prerequisite for sustainable ...
Assessment of Potential Effects of China Pakistan Economic Corridor on Development of Pakistan’s Construction Industry

Shehzad, Aamir (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

Role of construction sector in development of infrastructure is inevitable. The construction industry remains the key player in achievement of basic infrastructure and ultimately in social prosperity as well as economic ...
Effect of Jute Fibers and Glass Fiber Reinforced Polymer Rebars in Concrete for Bridge Girder Applications

Wahab, Abdul (DEPARTMENT OF CIVIL ENGINEERING, CAPITAL UNIVERSITY OF SCIENCE & TECHNOLOGY ISLAMABAD, PAKISTAN, 2019-01-01)

Many aspacts have been investigated previously in relation with the failure of concrete bridge girders. The main reasons for failure of bridge girders are cracking, heavy loads, crazing and mortar detaching. Among the ...
The Impact and Association among Innovation Types and Performance of Telecommunication Companies in Pakistan

Shah, Asim Ali (Department of Mechanical Engineering, Capital University of Science and Technology Islamabad, 2018-01-01)

Significance of innovation management has been presented in several studies by different authors around the globe. When it comes to innovation management related to telecommunication field in Pakistan it is best interpreted ...

Now showing items 201-220 of 928

Search DSpace

Advanced Search

Browse

All of DSpace
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

Engineering and Technology: Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account