Engineering and Technology: Recent submissions

  • Structural Design of Heliostat for Solar Thermal Power Plant 
    Mahboob, Kamran; Qaddus, Abdul; Aslam, Muhammad Muneeb; Ahmad, Ayaz; Mushtaq, Umar; Khan, Awais (IEEE 2018 2nd International Conference on Energy Conservation and Efficiency (ICECE), 2018-10-16)
    It is evident from recent developments that world is shifting from fossil fuels to renewable resources for clean energy production. Among these renewable technologies, solar is most predicted and consistent source of energy. ...
  • Experimental Study to Assess the Performance of Combined Savonius Darrieus Vertical Axis Wind Turbine at Different Arrangements 
    Siddiqui, Ali Shan; Mian, Syet Nadeem; Alam, Muhammad; Saleem ul Haq, Muhammad; Memon, Abdul Hameed; Jamil, Muhammad Shahzad (IEEE Energy 2018 IEEE 21st International Multi-Topic Conference (INMIC), 2018-11-01)
    Darrieus Vertical axis wind turbines (VAWT) have become one of the most worked on turbines in the 20th century, due to the various improvement regimes been carried out to improve their performance, especially the H-shaped ...
  • Aerodynamic analysis and dynamic modeling of small horizontal axis wind turbine 
    Khan, Sikandar; Khan, Afzal; Irfan, Muhammad; Hussain, Shah (IEEE 2012 International Conference of Robotics and Artificial Intelligence, 2012-10-22)
    In wind turbine the output torque and power depends on the incoming wind speed. Due to the rapid changes in the incoming wind speed the quality of output power becomes a serious problem. Many controls are introduced in ...
  • Sampled data dynamic surface control for inertia wheel pendulum 
    Mehdi, Niaz; Malik, Fahad Mumtaz; Bhatti, Aamir Iqbal; Qaiser, Nadeem (IEEE 2012 International Conference of Robotics and Artificial Intelligence, 2012-10-22)
    We present sampled-data version of dynamic surface control for a benchmark underactuated mechanical system in strict feedback form. Continuous time control law has been discretized in the first place and then applied to ...
  • FEA of lab scale drop test machine 
    Anjum, Muhammad Waleed; Iqbal, Muhammad Zahid; Andleeb, Rabia (IEEE 2016 International Conference on Emerging Technologies (ICET), 2016-10-18)
    Drop testing is very important in many industries. In industries, the items face severe environmental conditions during their working life. These environmental conditions can be due to high temperature, high pressure, ...
  • Aerodynamic study of a self-rectifying impulse turbine based on OWC wave energy prototype 
    Abbas, Saqlain; Abbas, Zulkarnain; Butt, Zubair; Butt, Zahid Suleman; Pasha, Riffat Asim (2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Many countries of the world fulfill their power requirements through non-renewable energy resources which include fossil fuels, earth minerals and nuclear fuels. The massive use of these non-renewable energy resources has ...
  • Design and Simulation of an Electro-mechanical Control System for Mini Hydro Power Plants 
    Ali, Asad; Siddiqi, Muftooh Ur Rehman; Muhammad, Riaz; Arshad (IEEE 2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Hydropower plant is the cheapest, environmental friendly and renewable energy production technology in rural and hilly areas. Most of it are run off river type plants, without reservoir at headrace and turbine is operated ...
  • Dust particle collection efficiency of venturi scrubber with varying number of orifices using CFX 
    Qamar, Sarim Ahmed; Sohail, Amir; Qureshi, Kamran; Shah, Ajmal; Irfan, Naseem (IEEE 2016 International Conference on Emerging Technologies (ICET), 2016-10-18)
    In the present study, computational fluid dynamics (CFD) investigation of dust particle collection efficiency in a force feed venturi scrubber has been performed using ANSYS CFX. A Venturi scrubber provides an effective ...
  • Design and Analysis of Tower Structure for Solar Thermal Power Plant 
    Mahboob, Kamran; Aslam, Muhammad Muneeb; Qaddus, Abdul; Ahmad, Ayaz; Mushtaq, Umar; Khan, Awais (IEEE 2nd International Conference on Energy Conservation and Efficiency (ICECE), 2018-10-16)
    World is witnessing the shift of global dependencies from fossil fuels to renewable resources. Solar thermal power plants are now replacing conventional power plants for the power production. There is a dire need to design ...
  • The Mechanical responses in Single Cantilever Test of Dynamic Mechanical Analysis for High Density Polyethylene Blended with Biopolymer 
    Sulong, Nurulsaidatulsyida Binti; Rus, Anika Zafiah Mohd; Salim, Nurul Syamimi M. (IEEE 2019 International Conference on Information Science and Communication Technology (ICISCT), 2019-03-09)
    The interest of present work is producing biopolymer-BP based on vegetable oil blended with high density polyethylene-HDPE by two different forms from particle-P and liquid-L forms namely as BPP and BPL respectively. ...
  • Gross potential of Biomass products for Energy Generation in Azad Jammu and Kashmir. A case study using Bio-IRENA Simulator 
    Zia, Ubaid Ur Rehman; Khalil, Muhammad Shahid; Tanzeel Ur Rashid; Awan, Waqas Nazir (IEEE 2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Economic stability of a country is critically driven by the outlook of its energy sector. This study discusses the range of organic materals than can be used to produce energy in Azad Jammu and Kashmir. Gross potential of ...
  • Energy outlook in Pakistan 
    Amber, Khuram Pervez; Ashraf, Naila (IEEE 2014 International Conference on Energy Systems and Policies (ICESP), 2014-11-24)
    Pakistan is facing a severe energy crisis of its history due to increase in the energy demand and lack of investment in mobilizing its energy resources. This paper aims to discuss the energy outlook and ways toward greener ...
  • Behavior of lab scale scissor dry friction damper under harmonic loading 
    Rafique, Hamid; Ahmed, Hammad; Iqbal, Muhammad Zahid (IEEE 2016 International Conference on Emerging Technologies (ICET), 2016-10-18)
    The behavior of scissor action dry friction damper under harmonic loading has been presented. Finite element model was developed in PTC CREO and then imported in ANSYS to check the response with varying values of normal ...
  • Longitudinal Velocity Control of Robotic Vehicle with Articulated Suspension 
    Gul, Shafaq; Malik, Fahad Mumtaz; Azim, Raja Amir (2018 IEEE 4th International Conference on Control Science and Systems Engineering (ICCSSE), 2018-08-21)
    Evolution of virtual prototype technology has a paramount importance in advance mechanical system development and exploration. In this paper skid steered RVAS (Robotic Vehicle with Articulated Suspension) virtual prototype ...
  • Stability of piezoelectric material for suspension applications 
    Elahi, H.; Israr, A.; Swati, R. F.; Khan, H. M.; Tamoor, A. (IEEE 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE), 2017-11-14)
    Piezoelectric materials have wide range of applications in the field of aerospace and automobile industry because of their ability to generate electric potential, response to mechanical signal as well as response to electric ...
  • Design and Simulation of Molten Salt Based Solar Thermal Power Plant using LFR Technology in Pakistan 
    Liaqat, Kashif; Ali, Arshad; Mengal, Ali Nawaz (IEEE 2018 International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), 2018-11-12)
    Pakistan being an underdeveloped country is facing several problems. One of the most important problems of the country has been Energy crises. Pakistan has very rich resources of renewable energy which are yet to be utilized. ...
  • Use of Fresnel solar concentrator for sustainable steam generation in textile industry of Pakistan 
    Quratulain; Saleem, Umair; Hanif, Muhammad Adnan; Aziz, Muhammad Shahzad (IEEE 2014 International Conference on Energy Systems and Policies (ICESP), 2016-11-24)
    Textile and Leather industries require hot water and steam extensively in different processes. To generate steam and heat oil, these industries use natural gas and heavy furnace oil. Natural gas is contributing 43.2% & Oil ...
  • Numerical Investigation of Aerodynamic Loads on a Flexible Wing 
    Toor, Z.; Khan, T. I.; Mufti, Bilal; Shehzad, U.; Masud, J.; Khan, O. (2019 IEEE 10th International Conference on Mechanical and Aerospace Engineering (ICMAE), 2019-07-22)
    In this paper fluid structure interaction of airflow over a flexible wing has been studied. The effect of structural deformity on the aerodynamic load characteristics of a real aero-elastic wing has been quantified in ...
  • Mechanical design of a tendon activated prosthetic hand 
    Shahbaz, Umar; Farooq, Umar; Khalid, M. Zulqarnain; Wahab, Talha; Iqbal, Javaid; Jafri, Hassan (IEEE 2012 International Conference of Robotics and Artificial Intelligence, 2012-10-22)
    This paper is based on a design of actuated prosthetic hand, a five fingered dexterous hand characterized by low cost fabrication. Prosthetic hand has been designed by following a biomedical approach based on biological ...
  • Gas turbine blade flow analysis comparison using CFD and Wind Tunnel 
    Abid, M. Ali Raza; Sarwar, M. Irfan; Tahir, Ahmad; Shah, Sayyid Masood; Shehryar, M. (IEEE Proceedings of 2012 9th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 2012-06-09)
    General Electric turbine blades are commonly used in many industrial gas turbine applications. The blade made by GE is twisted along its length so its modeling is quite difficult. The blade has been designed using reverse ...

Search DSpace


Advanced Search

Browse

My Account