PASTIC Dspace Repository

Browsing Proceedings by Title

Browsing Proceedings by Title

Sort by: Order: Results:

  • Khan, F.; Hussain, M.; Ali, S.; Ahmad, N.; Rahman, N. U.; N. Ullah (IEEE International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), 2018-11-12)
    Dual Rotor Permanent magnet flux switching machines are required where high torque density and plenty of driving modes are required. The dual-rotor PMFSM consists of a single stator shared by an inner rotor and outer rotor. ...
  • Ali, S. M.; Tareen, Nauman Khan; Sami, Irfan; Zahid Ullah; Khan, Khalid Salman; Farid, Umar; Khan, Bilal; Mehmood, C. A.; Jawad, M. (IEEE International Symposium on Recent Advances in Electrical Engineering (RAEE), 2018-10-17)
    Multi-correlated failures lead to severe power outages in an inter-connected power network. The critical loads of the data center, such as servers and chillers are highly dependent on the grid power. The service reliability ...
  • Anjum, Muhammad Waleed; Iqbal, Muhammad Zahid; Andleeb, Rabia (IEEE 2016 International Conference on Emerging Technologies (ICET), 2016-10-18)
    Drop testing is very important in many industries. In industries, the items face severe environmental conditions during their working life. These environmental conditions can be due to high temperature, high pressure, ...
  • Askary; Muzzaffar; Ali; Shuja; Sadiq (2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Pakistan, as a developing state, has been suffering through a severe energy crisis ever since its inception. This issue has exacerbated in the face of an ever-growing demand coupled by a lack of financial resource availability ...
  • Sheikh, Abdullah Asghar; Idrees, Qasim; Ahmad, Massab; Arshad, Muhammad Assad; Mahmood, Imran; Fayyaz, Ubaid Ullah; Rana, Inam Elahi; Zaffar, Nauman Ahmad (IEEE Clemson University Power Systems Conference (PSC), 2016-03-08)
    Power Line Communication (PLC) is one of the most promising contender for Advanced Metering Infrastructure (AMI). There are other contending communication technologies but PLC has an inherent advantage of using existing ...
  • Khan, Bakhtiar; Faraz, G.; Rehman, N.U.; Khan, F.; Saleem, J. (IEEE International Conference on Applied and Engineering Mathematics (ICAEM), 2018-09-04)
    This paper examines the electric field distribution in the gap of dielectric gas R410A for the sphere-sphere electrodes. FEMM (ver. 4.2) open dedicated simulation software for implementing Finite Element Analysis (FEA) is ...
  • Ms. Rabia; Ali, Engr Sarfaraz; Ehsan, Nadeem; Mirza, Ibtisam (IEEE International Conference on Remote Sensing, Environment and Transportation Engineering, 2011-06-24)
    The management of road communication network involves a wide range of areas including environment, economics, engineering, social development, safety, traffic management, and threat to sustainable systems, information ...
  • Hayat, Muhammad Khyzer; Shabbir, Saima; Zubair, Muhammad; Husain, Syed Wilayat (IEEE 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE), 2017-11-14)
    Nano-carbonaceous additives like carbon nanofibers (CNFs), carbon nanotubes (CNTs), graphene, graphene oxide (GO) and carbon nanoparticles have a wide range of properties and potential applications especially in aerospace ...
  • Pathan, Dur Muhammad; Unar, Mukhtiar Ali; Memon, Mujeeb-u-Din (IEEE 2005 Pakistan Section Multitopic Conference, 2005-12-24)
    In under ocean research, submarine plays indispensable role for collecting the facts and operating under sea. Due to working under ocean the task of submarine is risky for crew as well as for submarine itself. Therefore a ...
  • Abid, M. Ali Raza; Sarwar, M. Irfan; Tahir, Ahmad; Shah, Sayyid Masood; Shehryar, M. (IEEE Proceedings of 2012 9th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 2012-06-09)
    General Electric turbine blades are commonly used in many industrial gas turbine applications. The blade made by GE is twisted along its length so its modeling is quite difficult. The blade has been designed using reverse ...
  • Jawad, Muhammad; Ali, Sahibzada M.; Khan, Bilal; Mehmood, Chaudry A.; Farid, Umar; Zahid Ullah; Usman, Saeeda; Fayyaz, Ahmad; Jadoon, Jabran; Tareen, Nauman; Basit, Abdul; Rustam, Muhammad A.; Sami, Irfan (IEEE The Journal of Engineering, 2018-08-23)
    Electrical load and wind power forecasting are a demanding task for modern electrical power systems because both are closely linked with the weather parameters, such as temperature, humidity, and air pressure. The conventional ...
  • El-Kilani, J.; Zaid, Adnan I. O. (IEEE Power Generation System and Renewable Energy Technologies (PGSRET), 2015-06-10)
    Energy is a main factor in developing nations. Energy is almost a must for surviving with dignity. Palestine situation is different from other countries which can import their energy needs from outside. Palestinians are ...
  • Zia, Ubaid Ur Rehman; Khalil, Muhammad Shahid; Tanzeel Ur Rashid; Awan, Waqas Nazir (IEEE 2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Economic stability of a country is critically driven by the outlook of its energy sector. This study discusses the range of organic materals than can be used to produce energy in Azad Jammu and Kashmir. Gross potential of ...
  • Bhatti, Muhammad Kamran; Zahoor Ul Haque; Najam-ul-Islam, M.; Minhas, Abid Ali; Bhatti, Muhammad Adnan; Abdul Hadi; Khan, Shahid Ahmed; Qureshi, Naseer M. (IEEE 5th Conference on Engineering Education (ICEED), 2013-12-04)
    Practical skills are very important for better execution of theoretical knowledge. A hands-on experience is an essential factor in any environment where implementation is a daily business. Knowing the importance of practical ...
  • Hafeez, Kamran; Khan, Shahid A. (CSEE Journal of Power and Energy Systems, 2019-05-07)
    An HVDC transmission system for bulk power transfer over longer distance offers numerous advantages over an alternating current (AC) transmission system, such as direct integration of networks operating at different ...
  • Zafar, Naeem; Ahmed, Naveed; Janjua, Hadiya Zafar (16th International Bhurban Conference on Applied Sciences and Technology (IBCAST), 2019-01-08)
    Sandwich structures with honeycomb as core have number of applications for aerospace, automobile and civil engineering structures. Finite element method is an efficient and reliable tool for the extensive evaluations and ...
  • Maqbool, Yasir; Rafique, Muhammad Zeeshan; Hussain, Amjad; Ali, Hassan; Javed, Saleha; Amjad, Muhammad Saad; Khan, Mohammad Aamir; Mumtaz, Salman; Haider, Syed Mustafa; Atif, Muhammad (IEEE Access, 2019-08-19)
    The concepts of lean manufacturing operations and sustainability are congruent in nature, marked by the facet of improving organizational efficiency. However, only difference lies in the definition of waste. This definition ...
  • Maqbool, Yasir; Rafique, Muhammad Zeeshan; Hussain, Amjad; Ali, Hassan; Javed, Saleha; Amjad, Muhammad Saad; Khan, Mohammad Aamir; Mumtaz, Salman; Haider, Syed Mustafa; Atif, Muhammad (IEEE Access, 2019-08-19)
    The concepts of lean manufacturing operations and sustainability are congruent in nature, marked by the facet of improving organizational efficiency. However, only difference lies in the definition of waste. This definition ...
  • Rafique, M. Mujahid; Shakir, Muhammad Ali; Zahid, Imran; Chohan, Ghulam Yasin (2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), 2018-09-10)
    Electronic ISBN: 978-1-5386-7027-9 This paper aims to present an overview of relation between economic growth and energy consumption as a tool for sustainable development. The case of Pakistan is presented for its future ...
  • Durrani, Muhammad Amin; Avila, Alcantara; Rafael, Jesus; Ahmad, Iftikhar (IEEE 2018 International Conference on Computing, Mathematics and Engineering Technologies (iCoMET), 2018-03-03)
    Fractionation of crude oil in crude distillation unit (CDU) is an energy intensive process. Fractionation is carried out based on the cutpoint temperatures, i.e., the tray temperature of the CDU at which a product stream ...

Search DSpace


Advanced Search

Browse

My Account